| LCTKD Series Assembly Instructions |
Tools Required for Assembly: #2 Phillips head screwdriver Hammer Included Parts List: (1) Shelf Panel (1) Top Panel with ridge (1) Front Panel (2) Side Panels (4) Plastic Glides (14) Cams (14) Connecting Bolts Extra screws may be included. If any of the parts are missing please contact a customer service representative. |
 First, lay all the panels out on the floor. Using a hammer gently tap the plastic glides as indicated in the diagram. Make sure to install the glides 1 inch from the ends.  Insert all 14 Cams in the holes. Make sure that each of the arrows face toward their respective openings.  Next, screw in all 14 of the connecting bolts into the pre-drilled holes.  Pick up one of the side panels and align the holes to the connecting bolts protruding from the front panel. Use the screwdriver to tighten the cams by turning them clockwise so they lock into place.   Next, attach the center shelf using the same technique. Then attach the second side and tighten the cams.   Flip the lectern into the upright position. Position the top shelf so that the connecting bolts align with the opening in the base. Again, tighten the cams. |
